Paducah Rigging Logo
Home  >  Rigging Hardware  >  Wire Rope End Fittings  >  McKissick® S-423T “SUPER TERMINATOR®” Wedge Sockets

McKissick® S-423T “SUPER TERMINATOR®” Wedge Sockets

McKissick® S-423T “SUPER TERMINATOR®” Wedge Sockets available at Paducah Rigging

  • Description
  • Specifications

Description

Wedge sockets meet the performance requirements of Federal Specification RR-S-550E, Type C, except those provisions required of the contractor. Meets the performance requirements of EN13411-6:2003. For additional information, see page 452 of General Catalog.

  • The 423T wedge socket terminations have a minimum efficiency rating on most high performance, high strength, compacted strand, rotation resistant wire ropes of 80% based on the catalog breaking strength of the various ropes.**
  • Design eliminates the difficulty of properly seating the wedge with high performance wire rope into a wedge socket termination.
  • Proper application of the Super TERMINATOR eliminates the “first load” requirement of conventional wedge socket terminations.
  • S-423TW Wedge Kit can be retrofitted onto existing Crosby S-421T TERMINATOR wedge sockets.
  • Wedge and accessories provided with a zinc finish.
  • Meets the performance requirements of EN13411-6:2003.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these sockets meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
  • US Patent 8,375,527 B1.
  • Basket is cast steel and individually magnetic particle inspected.
  • Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets.
  • Secures the tail or “dead end” of the wire rope to the wedge, thus eliminates loss or “punch out” of the wedge.
  • Eliminates the need for an extra piece of rope, and is easily installed.
  • The TERMINATOR® wedge eliminates the potential breaking off of the tail due to fatigue.
  • The tail, which is secured by the base of the clip and the tension device, is left undeformed and available for reuse.
  • Available with Bolt, Nut, and Cotter Pin.

Specifications

S-423T WEDGE SOCKETS
Assembly includes Socket, Wedge, Pin, Wire Rope Clip, Tensioner,
Bolts and Secondary Retention Wire

Wire Rope Dia. S-423T Assembly with Round Pin and Cotter Pin S-423TB Assembly with Bolt, Nut and Cotter Pin S-423TW**
Wedge Kit
(in.) (mm) S-423T Stock No. API 2C S-423T Stock No. S-423T Weight Each S-423TB Stock No. API 2C S-423TB Stock No. S-423TB Weight Each S-423TW Stock No. S423TW Weight Each
(lbs.) (kg) (lbs.) (kg) (lbs.) (kg)
5/8 14- 16 1035123 1035128 12.7 5.8 1035218 1035223 13.1 5.9 1034018 5.2 2.4
3/4 18-19 1035132 1035137 19.4 8.8 1035227 1035232 19.1 8.7 1034027 7.2 3.3
7/8 22 1035141 1035146 28.8 13.1 1035236 1035241 27.8 12.6 1034036 10.3 4.7
1 24-26 1035150 1035155 39.2 17.8 1035245 1035250 37.3 16.9 1034045 11.9 5.4
1-1/8 28 1035169 1035174 57.1 25.9 1035254 1035259 57.9 25.9 1034054 19.9 9.0
1-1/4 30-32 1035178 1035183 88.6 40.2 1035272 1035277 88.1 39.9 1034063 33.8 15.3

** Kit contains Wedge, Wire Rope Clip and Bolts, Tensioner Bolt and Secondary Retention Wire.

Wire Rope Dia. S-423T Stock No. Dimensions (in.)
(in.) (mm) A B C D E F G H J* L P R S T U V
5/8 14-16 1035123 8.25 4.50 1.25 1.19 3.00 4.06 2.13 4.61 12.31 1.22 2.25 .56 3.25 .75 6.88 2.60
3/4 18-19 1035132 9.88 5.20 1.50 1.38 3.25 4.81 2.44 5.37 14.69 1.40 2.62 .66 3.63 .88 7.65 3.02
7/8 20-22 1035141 11.25 5.88 1.75 1.63 3.81 5.73 2.69 6.16 16.98 1.67 3.13 .75 4.31 1.00 9.47 3.47
1 24-26 1035150 12.81 6.56 2.00 2.00 3.81 5.73 2.94 7.05 18.54 2.01 3.75 .88 4.70 1.13 10.41 3.82
1-1/8 28 1035169 14.38 6.94 2.25 2.25 4.00 6.85 3.38 7.81 21.23 2.26 4.25 1.00 5.44 1.25 50 11.83
1-1/4 1-1/4 1035178 16.34 8.63 2.62 2.50 4.50 7.76 3.57 9.38 24.10 2.34 4.50 1.06 6.62 1.38 13.87 5.82

* Nominal NOTE: For intermediate wire rope sizes, use next larger size socket.
The S-423T Super TERMINATOR wedge is designed to be assembled only into the Crosby S-421T TERMINATOR socket body.
IMPORTANT: The S-423TW for sizes 5/8" through 1-1/8" will fit respective size standard Crosby S-421T basket. The 1-1/4" S-423TW will only fit the Crosby S-421T 1-1/4" basket marked with TERMINATOR.

Related products

  • Crosby® SS450 Stainless Steel Wire Rope Clips available at Paducah Rigging

    Crosby® SS450 Stainless Steel Wire Rope Clips

    More Info
  • National Four Post Hydraulic Swaging Machines used by Paducah Rigging

    National Four Post Hydraulic Swaging Machines

    More Info
  • A Crosby 517 mooring socket available at Paducah Rigging

    Crosby® 517 Mooring Sockets

    More Info
  • Crosby® 429 Fist Grip Clips available at Paducah Rigging

    Crosby® 429 Fist Grip Clips

    More Info

Categories

Get the support you need.

CONTACT US

St. Louis, IL

7701 St. Clair Avenue
East St. Louis, IL 62203

Phone (618) 398-1991

Fax (618) 398-5125

salesstl@paducahrigging.com

Paducah, KY

4150 Cairo Road
Paducah, KY 42001

Phone (270) 443-3863

Fax (270) 443-8437

sales@paducahrigging.com

Memphis, TN

3496 WinHoma Dr
Memphis, TN 38118

Phone (901) 350-8199

memphis@paducahrigging.com

Greenville, MS

1661 Harbor Front Road
Greenville, MS 38702

Phone (662) 378-4745

Fax (662) 378-4753

mssales@paducahrigging.com

Reserve, LA

3931 W. Airline Highway
Reserve, LA 70084

Phone (985) 536-6045

Fax (985) 536-6055

salesla@paducahrigging.com

Channelview, TX

8915 Sheldon Road
Channelview, TX 77049

Phone (281) 456-0900

Fax (281) 456-0904

texas@paducahrigging.com

Paducah Rigging Logo

Copyright 2023 Paducah Rigging | All Rights Reserved