Specifications
For use with pins or bolts
Actual hole size must be specified. If hole is 1" or less, increments of 1/16" are acceptable. If the hole is larger than 1", the standard increment is 1/8".
| Shank Diameter |
Thickness | Outside Diameter |
Max. Inside Diameter of Drilled Hole |
Suggested Inside Dia. of Drilled Hole |
Center of Hole of Last Usable Thread (E) |
|---|---|---|---|---|---|
| 1 | 1 | 25/16 | 13/16 | 3/4 | 17/8 |
| 13/8 | 13/8 | 31/4 | 13/4 | 15/16 | 21/2 |
| 13/4 | 13/4 | 33/4 | 2 | 111/16 | 215/16 |
| 2 | 2 | 43/16 | 21/4 | 15/16 | 23/4 |
