Crosby® CCBC Beam Clamps

Crosby® CCBC Beam Clamps

Crosby Clamp-Co Beam Clamps provide an efficient method for handling wide flange beam sections and plate girders. When lifting, these beam clamps grip the beam at three points, and when properly balanced and safely guided, the beam can be handled even if the clamp is slightly off center lengthwise.

  • Capacities: 5 Tons to 35 Tons
  • Eliminates the need for slings, chokers, and spreader bars.
  • When applied to load, the tongs automatically open and slide under the flange of the beam.
  • Center plate and gripping tongs work together – the heavier the beam, the greater the clamping pressure.
  • Model “NS” clamps have a recessed base to accept studs welded to the beam surface.
  • Individually Proof Tested to 2 times the Working Load Limit with certification.
  • Finish – Red Paint.
  • All sizes are RFID EQUIPPED.
Model
No.
CCBC-500
Stock
No.
Working
Load Limit
(Tons)*
Flange Grip Range
(in.)
Weight
Each
(lbs.)
Dimensions
(in.)
Width   Thickness  A B C D E F G H J
F-5 2732000 5 4 – 10 .5 – 1 70.0 9.50 26.00  12.00 20.00 25.50  16.00 4.00 10.00 1.00
F-15 2732009 15 7 – 17 .5 – 2 153 15.50 34.00 17.00 27.00 34.50 25.00 7.00 17.00 2.00
 NS-15 2732018 15 7 – 17 .5 – 2 153 15.50 34.00 17.00 27.00 34.50 25.00 7.00 17.00 2.00
F-25 2732027 25 16 – 24 1 – 3 290 23.00 48.00 22.25 36.00 53.00 37.25 16.00 24.00 3.00
NS-25 2732036 25 16 – 24 1 – 3 290 23.00 48.00 22.25 36.00 53.00 37.25 16.00 24.00 3.00
F-35  2732045 35 16 – 36 1.63 – 4 519 30.00 64.00 27.50 48.00 58.00  53.00  16.00 36.00  4.00
NS-35  2732054 35 16 – 36 1.63 – 4 519 30.00 64.00 27.50 48.00 58.00  53.00 16.00 36.00  4.00

 

 Base
Stock
No.
Base Dimensions
(in.)
 C L M N P S T
F-5 13.50 3.00
F-15 17.00 4.00
NS-15 17.00 .50 6.50 4.50  .75 4.00 2.50
F-25 22.25 5.50
NS-25 22.25  .75 7.75 6.50  .75 5.50 4.00
F-35 27.50  – 6.00
NS-35 27.50 .75 9.00 8.50  .75 6.00 4.50