Crosby® 400 Eye Nuts

Crosby® 400 Eye Nuts

  • Forged Steel – Quenched and Tempered.
  • Hot Dip galvanized.
  • Tapped with standard UNC class 2 threads after galvanizing.
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements.  Importantly, these products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
  • Also available in blank (as forged) item (S-4028) or on request with metric threading ( M-400).
  • Recommended for In-Line pull.
Size
No.
 “S”
Stock
Size
(in.)
G-400
Stock No
Std.
Tap
Size
Working
Load Limit
(lbs.)*
Weight
Per 100
(lbs.)
Dimensions
(in.)
 A C D E  F J K N T W
1 .25 1090438 1/4 520 .09 1.25 .75 1.00 .75 .50 .69 .63 .38 1.72 .31
2 .31 1090474 3/8 1250 .17 1.62 1.00 1.20 .83 .56 .81 .89 .50 2.09 .41
3A .38 1090517 1/2 2250 .28 2.00 1.25 1.44 1.08 .81 1.00 1.09 .62 2.55 .50
4 .50 1090535 5/8 3600 .60 2.50 1.50 1.92 1.35 1.00 1.31 1.31 .69 3.25 .69
5 .63 1090553 3/4 5200 1.00 3.00 1.75 2.38 1.59 1.12 1.50 1.57 .88 3.89 .84
6 .75 1090571 7/8 7200 1.65 3.50 2.00 2.63 1.96 1.38 1.88 1.77 .94 4.32 1.00
7 .88 1090599 1 10000 2.69 4.00 2.25 3.06 2.21 1.56 2.13 2.02 1.07 5.01 1.19
8 1.00 1090633 1-1/4 15500 4.38 4.50 2.50 3.50 2.46 1.88 2.38 2.27 1.25 5.78 1.38
9 1.13 1090651 1-3/8 18500 5.00 5.00 2.75 4.00 2.69 2.00 2.56 2.53 1.38 6.51 1.50
10 1.25 1090679 1-1/2 22500 6.78 5.62 3.12 4.31 3.09 2.25 3.00 2.82 1.50 7.06 1.66
11 1.50 1090697 2 40000 14.60 7.12 4.10 6.20 4.09 3.13 3.75 3.68 2.06 9.91 1.94